4 bridge mode settings, 1 wds settings, 2 wds security – AirLive AP60 User Manual
Page 49
4. Wireless Settings
79
AirLive AP60 User’s Manual
4.4 Bridge Mode Settings
4.4.1 WDS Settings
Wireless Settings -> WDS
For Bridge network, it is required to enter the Wireless MAC address of all remote
bridges that is connected directly to your AP60. The wireless MAC address is also
known as BSSID that is display on your site survey result.
MAC Address: Please enter the Wireless MAC address or BSSID of the remote
Bridge. You can usually find it at remote Bridge’s device label.
Comment: If you input anything that will help remind you about which remote
Bridge it is.
4.4.2 WDS Security
Operation Mode -> WDS -> Set Security -> WDS Security Settings
Security settings allow you to use encryption to secure your data from eavesdropping.
You can select different security policy to provide association authentication and/or data
encryption.
WEP
WEP Encryption is the oldest and most available encryption method. However, it is also
the least secure.