AirLive WFP-151U - Manual (Page 108)

9. MFP Server Installation in UNIX/Linux
103
AirLive WFP-151U User’s Manual
9. If the test page is printed without problem, please click “Yes”. If it is failed to print, please
click “No” to go back to “Printer configuration - fedora” screen and configure again.
9.2 Console Mode
To configure the MFP Server for LPD printing, perform the procedures below:
1. Enable MFP Server’s TCP/IP Support.
2. Set up MFP Server’s IP address.
3. Verify MFP Server’s IP Address.
4. Configure remote LPD printing on the host.
5. Print a test page.
In the next sections, we will describe these five procedures step by step.