AirLive WFP-151U - Manual (Page 63)

6. Web Management in WFP-151U
AirLive WFP-151U User’s Manual 58
Name, the name of the MFP Server. You can use this name to identify the MFP Server
when you are searching for the MFP Server by the “Server Manager” utilities.
Password, enter the password you want to change to the MFP Server. The password can
be up to 7-digit alphanumeric format. The default password is “airlive”.
Re-type Password, enter the same password for the MFP Server again.
6.4.2 Wireless Setting
If you want to use the MFP Server through wireless LAN, please set up the MFP Server
through Ethernet first and make sure your wireless LAN setting is correct. After setting the
wireless LAN, unplug the Ethernet cable and restart the MFP Server, then you can start to
use the MFP Server through wireless LAN. If the wireless configuration does not work,
please plug the Ethernet cable again, restart the MFP Server and configure the MFP Server
through Ethernet until the wireless LAN settings are correct.
You can enable/disable the wireless function and set up the wireless parameters for the
MFP Server from here. The parameters include “Function”, “Mode”, “ESSID” and “Channel
Number”. You can manually set the wireless network that you want to connect in this page
or use the “Site Survey” function to automatically search for an available wireless network
and associate with it.
Function is for user to disable, enable or let the MFP Server auto select to connect to the