AirLive WFP-151U - Manual (Page 45)

5. Server Configuration
AirLive WFP-151U User’s Manual 40
DHCP Server
Click the “DHCP Server” button to enter into the DHCP server’s setting page. By the
default, the DHCP server is disabled.
Auto – If “Auto” is selected, the MFP Server will detect DHCP server within the network
automatically and once the DHCP server doesn’t exist, the MFP Server will turn on his own
DHCP server and assign IP Address to client. Please fill in the “Starting Address”, “Range”,
“Subnet Mask”, “Gateway” and “DNS”; then the MFP Server will assign a unique IP within
the range for each DHCP client.
Enable – If the DHCP is enabled, you have to assign a range of IP addresses. Fill in the
“Starting Address”, “Range”, “Subnet Mask”, “Gateway” and “DNS”; then the MFP Server
will assign a unique IP within the range for each DHCP client.
Disable – The DHCP Server is disabled. You have to build up a DHCP Server in the
network or set the IP Address for each client manually.