AirLive WFP-151U - Manual (Page 32)

4. MFP Manager
27
AirLive WFP-151U User’s Manual
MFP Server List The “MFP Server List” will list all the MFP Servers within the
network. You can find the information of the MFP Servers
including “MFP Server Name”, “MAC ID”, “IP Address” and
the device that is connected to the MFP Server.
MFP Server/MFP
Information When you are clicking on the “MFP Server” in the “MFP
Server List”, you will see the “MFP Server Description” and
the “Idle Timeout” setting for the MFP Server.
MFP Server Description – It is a description that can help
users to identify where or what the MFP Server is.
Idle Timeout – From here, each user can know his/her
auto release setting. To avoid occupying the MFP overtime,
each user can enable the “Auto Release” setting at the
bottom of the “MFP Manager” utility. It is used to
automatically disconnect the connection after the MFP is
idle for a specified period of time. By default, it is never
released.
When you are clicking on the “MFP” in the “MFP Server
List”, you will see the information including “Status”,
“Computer Name” and “Contact Information”.
Status – It displays the status of the MFP including
Connected, Idle and Busy. When the status is “Connected”,
it indicates that you are connecting the MFP. When the
status is “Idle”, it indicates that the MFP is not being used.
When the status is “Busy”, it indicates that other user is
using the MFP to scan, print, or etc.
Computer Name – It display the computer name of the
user who is connecting to the MFP.
Contact Information – When the current user has set his
“Contact Information”, you can see it here. You can contact
with the current user for asking to disconnect the MFP.
Refresh Refresh the “MFP Server List” immediately.
Connect Let the MFP be connected to your computer.
Disconnect Disconnect the selected MFP.
Add to My Favorite Add the MFP Servers that you frequently use to “My