AirLive WFP-151U - Manual (Page 44)

5. Server Configuration
39
AirLive WFP-151U User’s Manual
5.6 TCP/IP Configuration
Double Click “TCP/IP” icon and the TCP/IP configuration window will pop-up.
You can configure the MFP Server to automatically get IP from DHCP server or manually
specify static IP. The MFP Server also has a built-in DHCP server. You can enable this
DHCP server and let it manages IP for you.
IP Address Assignment
Click the “IP” button to enter the IP setting page. If you need the MFP Server to
automatically get an IP from DHCP server, select “Auto IP”. You also can select “Static IP”
to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the MFP Server. By
default, “Static IP” is enabled and the default settings are as follows.
IP Address: 192.168.2.2
Subnet Mask: 255.255.255.0
Auto IP – The IP Address information of the MFP Server obtained from DHCP Server will
be displayed in the address field. If no DHCP Server is present, you have to assign the
information manually.
Static IP – Manually assign the IP address information in the same network with your
computer to the MFP Server.