AirLive WFP-151U - Manual (Page 20)

2. Installing the WFP-151U
15
AirLive WFP-151U User’s Manual
16. Choose if you want to run the “MFP Manager” utility automatically when Windows starts.
It is recommended to enable the setting.
17. The default wireless setting is “Auto” mode. The MFP Server will detect if the MFP
Server is connected to a wired LAN network through the attached Ethernet cable. If yes,
it will work in wired network. To enable the wireless setting, please remove the Ethernet
cable. For more detailed information about wireless setting, please refer to Chapter 4.
2.7 MFP Server Utilities
After the installation is completed, there will be three utilities and a text file in the MFP
Server’s Program folder.