AirLive WFP-151U - Manual (Page 119)

11. Troubleshooting
AirLive WFP-151U User’s Manual 114
Note: Set a static IP Address to MFP Server is recommended since DHCP assignment
may dramatically change the IP Address for MFP Server.
3. A user always connects the MFP Server.
„ Contact with the current user and ask the user to disconnect the device.
„ If the user forgets to disconnect the device, you can inform the administrator to
release the device.
4. I can’t use the MFP to scan, print, read the card reader or fax a file even I have followed
the installation of MFP as the manual.
„ Check if the MFP you are using is in the “Compatibility List”.
„ Attached the MFP to PC directly and try if the MFP is able to use.
5. My computer has installed the firewall and the MFP Server can’t work normally in my
computer.
„ Some firewalls, for example, the “Network Access Manager” firewall program
attached with nVidia network card may block the communication between MFP
Server and your computer; you have to add the MFP Server programs to the
exception list of your firewall. The programs are as follows.