Chapter 3: led indicator – AirLive WH-9000MESH User Manual
Page 17
Chapter 3: LED Indicator
The top panel of the WH-9000MESH contains a set of indicator lights that help describe the state of
various networking and connection operations. Figure 3-1 illustrate LED location and Table 3-1
describe the detail LED definition
Figure 3-1 LED Location
Table 3-1: LED definition
LED Description
Power
If this light is on, the unit is on;
If it is not on, the unit is off
WAN
If this light is on, the unit is connected to network
If it is off, the unit does not have an active connection to network
WLAN1 (AP)
The light is ling for indicate the WLAN 1 is active.
The light is blinking to indicates data transmission
WLAN2 (Bridge)
The light is ling for indicate the WLAN 2 is active.
The light is blinking to indicates data transmission
WLAN2 SS
(Signal Strength)
This indicates the WLAN2 received signal strength
1. LED off: no connection on the bride side, or the signal is very week
2. LED blink slowly (every 1 second): there is a connection and signal quality is poor
3. LED blink fast: there is a connection, and the signal quality is good
4. LED steady: there is connection, and the signal quality is excellent
Mode No
using
AirLive WH-9000-MESH User’s Manual
16