AirLive WH-9000MESH - Manual (Page 39)

y BSSID:
- Entering remote bridge’s MAC address at the BSSID field of “Add remote AP’s
BSSID/Note” section. Although it is option item, entering a note that defines the location
of the remote bridge may be helpful for your management lots of remote bridges. After
you key in BSSID and Note, clock the “Add” to list this item at “Remote AP’s MAC
Address” section.
y Encryption:
- Setting Encryption type: Off or Static AES Key
- Each bridge must have the same encryption type. And if using Static AES Key, the key of
each bridge must be the same.
Click apply to accept your changes
7.4.1 Example: Point-to-Point Bridge configuration
Direction Bridge 1 Bridge 2
Wireless Bridge - General
Bridge Mode Manual Bridge Manual Bridge
Spanning Tree Protocol
Enable
(or Disable if no bridging loop)
Enable
(or Disable if no bridging loop)
Wireless Bridge - Radio
Channel 4 4
Wireless Mode 802.11g (for high data rate) 802.11g (for high data rate)
TX Power Auto Auto
Propagation distance Select appropriate value Select appropriate value
BSSID
Add Bridge 2 BSSID
(MAC address)
Add Bridge 1 BSSID
(MAC address)
Wireless Bridge – Encryption
Encryption
Select appropriate Key type and
Key. Must be the same key as
Bridge 2 Select appropriate Key type and
Key. Must be the same key as
Bridge 1
AirLive WH-9000-MESH User’s Manual 38