AirLive WH-9000MESH - Manual (Page 64)

Chapter 15: Technical Support
Manufacturer’s Statement
The WH-9000MESH is provided with warranty. It is not desired or expected that the user open the
device. If malfunction is experienced and all external causes are eliminated, the user should return the
unit to the manufacturer and replace it with a functioning unit.
If you are experiencing trouble with this unit, the point of contact is: your manufacturer or sales
representative.
Radio Frequency Interference Requirements
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the Federal Communications Commission’s Rules and Regulations. These limits are
designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may came
harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his
own expense-
Installation should be accomplished using the authorized cables and/or connectors provided with the
device or available from the manufacturer/distributor for use with this device. Changes or modifications
not expressly approved by the manufacturer or party responsible for this FCC compliance could void
the user authority to operate thee equipment.
Channel Separation and WLAN Cards
There are two WLAN cards in this device. One is used for the Access Point function; the other is used
for the Bridge. Channel Separation is required to reduce interference between the AP and Bridge
WLAN cards. We have found that assigning 11 to the AP and 4to the Bridge has given the optimum
channel separation in test installations.
AirLive WH-9000-MESH User’s Manual 63