AirLive WH-9000MESH - Manual (Page 22)

y System Time: You can manual key in the time and day, or get them automatically from NTP server.
The 9000MESH serial products are with RTC chip to keep date and time data. It can keep system
date and time data for 5 days.
y Login Banner:
When you are satisfied with your changes, click Apply.
5.3 System Configuration – WAN
Click the entry on the left hand navigation panel for System Configuration – WAN. This directs you to
the System Configuration –
WAN page.
The default IP of WAN is
as static IP. You need in
the information that the AP
requires in order to allow
the wireless devices
(9000MESH) access to the
wired LAN. This will be the
IP address, Subnet Mask,
Default Gateway, and,
where needed, DNS1 and 2. The default WAN port value is IP Address: 192.168.254.254, Subnet
Mask: 255.255.255.0, Default Gateway: 192.168.254.1.
put
You also can choose “Using DHCP to get an IP address”. By this way, the 9000MESH will get an IP
address from DHCP server.
Click Apply to accept changes.
5.4 System Configuration – LAN
Click the entry on the left hand navigation panel for System Configuration – LAN. This directs you to the
System Configuration – LAN page.
AirLive WH-9000-MESH User’s Manual 21