AirLive WH-9000MESH User Manual
Page 44
Click the entry on the left hand navigation panel for Wireless Bridge-General and choose Auto Bridging,
directs you to this page.
y
SSID:
The SSID can be treated as a nickname of Auto Bridge network. The SSID of bridges those you
want to link together need be same.
y
Max Auto Bridges:
Maximum number of auto bridge allowed
y
Bridge Priority:
Determining the root device and routing path cost, the lowest bridge priority in the network will
become the root device of bridge network topology.
y
Signal Strength Threshold:
I
f the signal strength of remote node is blow this threshold. The link will be dropped.
y
Broadcast SSID
It on by default to enabled bridge will use SSID for token for communication. If don’t like SSID be
exposed, it can be disable. However both setting must be same, otherwise the devices cannot
bridge together.
y
Signal Strength MAC:
Choosing the BSSID that you want to know the received signal strength, the SS LED will indicate
the signal strength by different flicker frequency. If you don’t wish to display any connection signal,
just leave it as empty. You need click “Set” after you change this value.
AirLive WH-9000-MESH User’s Manual
43