AirLive WIAS-1200G - Manual (Page 114)

AirLive WIAS-1200G
User’s Guide
106
Appendix A – Console Interface
Via this port to enter the console interface for the administrator to handle the problems and situations occurred
during operation.
1. In order to connect to the console port of AirLive
WIAS-1200G, a console, modem cable and a terminal
simulation program, such as the Hyper Terminal are
needed.
2. If a Hyper Terminal is used, please set the parameters
as 9600,8,n,1.
Note:
The main console is a menu-driven text interface with dialog boxes. Please use arrow keys on the keyboard to
browse the menu and press the Enter key to make selection or confirm what you enter.
3. Once the console port of AirLive WIAS-1200G is connected properly, the console main screen will appear
automatically. If the screen does not appear in the terminal simulation program automatically, please try to press
the arrow keys, so that the terminal simulation program will send some messages to the system and the
welcome screen or the main menu should appear. If you are still unable to see the welcome screen or the main
menu of the console, please check the connection of the cables and the settings of the terminal simulation
program.