AirLive WIAS-1200G - Manual (Page 180)

AirLive WIAS-1200G
User’s Guide
172
e
During AirLive WIAS-1200G restarting, a “Restarting now.
Please wait for a moment….” message will appear on the
screen. Please do not interrupt AirLive WIAS-1200G until the
Configuration Wizard window has disappeared. Then the
Administrator Login page will appear. This indicates that the
restart process has completed.
Now, the basic configuration for SMB environment has
been finished!
If all the steps are done properly, AirLive WIAS-1200G can b
further connected to the managed network to experience the
controlled network access environment. Firstly, connect a
client’s networking device to Public Port or Wireless Interface
of WIAS-1200G to obtain an IP address automatically. After
the IP address is obtained, launch an Internet browser and
link to any website. The User Login Page will appear.
Key in the username and password (e.g. test@NTDomain
for the username and test for the password) created in the
NT Domain server user account in the interface and then click Submit to connect the network.
Congratulation!
Login success page appearing means AirLive WIAS-1200G
has been installed and configured successfully. Now, you can
browse the network or surf on the Internet!
P/N: V10020070525