3 panel function descriptions, Panel function descriptions – AirLive WIAS-1200G User Manual
Page 16
AirLive WIAS-1200G
User’s Guide
8
3.1.3 Panel Function Descriptions
Front Panel
Rear Panel
y
DC IN: The power adaptor attaches here.
y
RESET: Press this button to restart the system.
y
WAN: The WAN port is used to connect to a network which is not managed by the AirLive WIAS-1200G, and this
port can be used to connect the ATU-Router of ADSL, the port of Cable Modem, or the Switch or Hub on the
LAN of a company.
y
LAN1/LAN2: The two LAN ports are connected to the managed network or WLAN. They can be selected to
require or not require authentication to access network resources and Internet.
y
LAN3/LAN4: The two LAN ports are connected to a trustful network where the users can always use the
network resources without authentication. This port can be connected to a server such as File Server or a
Database Server, etc.
y
Console: The system can be configured via HyperTerminal. For example, if you need to set the Administrator’s
Password, you can connect a PC to this port as a Console Serial Port via a terminal connection program (such
as the super terminal with the parameters of 9600, 8, N, 1, None flow control) to change the Administrator’s
Password. Meanwhile, it also can connect to TP-1000 ticket printer for printing On-demand User ticket.