5 lan3 & lan4 configuration, Lan3 & lan4 configuration – AirLive WIAS-1200G User Manual
Page 37
AirLive WIAS-1200G
User’s Guide
29
4.1.5 LAN3 & LAN4 Configuration
In this section, set the related configuration for LAN3/LAN4 port and DHCP server.
y
LAN3 & LAN4 Port
Operation Mode:
Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address:
Enter the desired IP address for the LAN3 & LAN4 port.
Subnet Mask:
Enter the desired subnet mask for the LAN3 & LAN4 port.
y
DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay
.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose “Enable DHCP Sever” function and set the appropriate configuration for
the DHCP server. The fields with red asterisks are required to be filled in.