AirLive WIAS-1200G User Manual
Page 56
AirLive WIAS-1200G
User’s Guide
48
4.2.1.6
Authentication Method – On-demand User
On-demand User Server Configuration: Administrators can enable and configure this authentication method to
provide wireless access in a Hotspot environment. Major functions include accounts creation, users monitoring list,
billing plan, billing report statistics, and external payment gateway support.
Server Status:
The status shows that the server is enabled or disabled.
Postfix:
Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0~9), alphabets
(a~z or A ~Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
Receipt Header:
There are two fields, Receipt Header 1 and Receipt Header 2, for the receipt’s header.
Enter receipt header message or use the default.
Receipt Footer:
Enter receipt footer message here or use the default.
Printer Baud Rate:
Select the desired transmission baud rate. The default value is 9600.
Monetary Unit:
Select the desired monetary unit.
WLAN ESSID:
Enter the ESSID of the AP. Administrators can supply a new name or use the default name.
Wireless Key:
Enter the Wireless key of the AP such as WEP or WPA.
Remark:
Enter any additional information that will appear at the bottom of the receipt.
Billing Notice Interval:
While the on-demand user is still logged in, the system will update the billing notice
of the login successful page by the time interval defined here.
Twin Ticket:
Enable this function to print duplicate receipts.