AirLive WIAS-1200G User Manual
Page 174
AirLive WIAS-1200G
User’s Guide
166
During AirLive WIAS-1200G restarting, a “Restarting now.
Please wait for a moment...”
Message will appear on the
screen. Please do not interrupt AirLive WIAS-1200G until the
Configuration Wizard
window has disappeared. Then the
Administrator Login page will appear. This indicates that the
restart process has completed.
Now, the basic configuration for Hotspot environment has
been finished!
If all the steps are done properly, AirLive WIAS-1200G can be
further connected to the managed network to experience the
controlled network access environment. Firstly, connect a
client’s networking device to Public Port or Wireless interface of
WIAS-1200G to obtain an IP address automatically. After the IP
address is obtained, launch an Internet browser and link to any
website. The User Login Page will appear.
Key in the username and password created previously by
Setup Wizard in the local user database (e.g. test@Local for
the username and test for the password) or from on-demand
user account, click Submit to connect to the network.
Congratulation!
Login success page appearing means AirLive WIAS-1200G
has been installed and configured successfully. Now, you can
browse the network or surf on the Internet!