AirLive WL-5460AP v2 - Manual (Page 12)

AirLive WL-5460AP v2 User Manual
13
匡Check the LED:
The Power and LAN # LED should be ON. LAN# LED will even blink if there is traffic.
The Link/Act LED will be on in static when associated with a station and blink whenever this
AP receives data packets in the air.
If the Status LED glows after self-test, it means the Wireless Access Point fails on self test.
Please ask your dealer for technical support.
1 Please make sure your computer IP is in the same subnet as the AP (i.e.
192.168.100.x).
2 Please make sure your computer has wireless network adapter installed.
3 Open the web browser and enter http://192.168.100.252/.