AirLive WL-5460AP v2 User Manual
Page 53
AirLive WL-5460AP v2 User Manual
54
select a level to make sure that the output power measured at the antenna end will not
exceed the legal limit in your country.
Enable WatchDog: Check and enable this watch dog function.
Watch Interval: Setup the interval time for watch dog function between 1 to 60 mins.
Watch Host: Enter the watch dog host ip address.
Ack timeout: When a packet is sent out from one wireless station to the other, it will waits
for an Acknowledgement frame from the remote station. If the ACK is NOT received within
that timeout period then the packet will be re-transmitted resulting in reduced throughput. If
the ACK setting is too high then throughput will be lost due to waiting for the ACK Window
to timeout on lost packets. By having the ability to adjust the ACK setting we can effectively
optimize the throughput over long distance links. This is especially true for 802.11a and
802.11g networks
You can set as default for auto adjustment.