AirLive WL-5460AP v2 - Manual (Page 22)

AirLive WL-5460AP v2 User Manual
23
2.2.7 WISP + Universal Repeater mode
In this mode, the AP behaves virtually the same as the WISP mode, except one thing: the
AP can also send wireless signal to the LAN side. That means the AP can connect with the
remote WISP AP and the indoor wireless card, and then provide IP sharing capability all at
the same time!
To set the operation mode to Client (Infrastructure), please go to “Mode” field and select
the “WISP + Universal Repeater” mode.