AirLive WL-5460AP v2 User Manual
Page 27
AirLive WL-5460AP v2 User Manual
28
Ø Channel Number: Allow user to set the channel manually or automatically. If set
channel manually, just select the channel you want to specify. If
“Auto”
is selected,
user can set the channel range to have Wireless Access Point automatically survey
and choose the channel with best situation for communication. The number of
channels supported depends on the region of this Access Point. All stations
communicating with the Access Point must use the same channel.
Ø Auto Mac Clone (Single Ethernet Client): If your ISP restricts service to PCs only,
use the MAC Clone feature to copy a PC Media Access Control (MAC) address to your
router. This procedure will cause the router to appear as a single PC, while allowing
online access to multiple computers on your network.
Ø Manual MAC Clone Address: You can also manually provide MAC address to the
router. This solves the problem if you have more than one PC which need to access
the internet..
Ø Site Survey: Site survey helps to find out available access point around. You can also
check to prevent using same SSID or channel with other AP.
To configure the security connection, please refer to Section 3.9 Wireless Security
Settings ……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless
Settings ……
To configure the access control, please refer to Section 3.11 Access Control
Settings ……
To configure the Traffic Control, please refer to Section 3.12 Access Control
Settings ……