AirLive WL-5460AP v2 - Manual (Page 65)

AirLive WL-5460AP v2 User Manual
66
Clone MAC Address: You can specify the MAC address of your Access Point to replace
the factory setting.
4.2 Upgrade Firmware
To Upgrade Firmware:
1. Download the latest firmware from your distributor and save the file on the hard drive.
2. Start the browser, open the configuration page, click on Other, and click “Upgrade
Firmware” to enter the Upgrade Firmware window. Enter the new firmware’s path and file
name (i.e. C:\FIRMWARE\firmware.bin). Or, click the “Browse” button, find and open the
firmware file (the browser will display to correct file path).
3. Click Reset to clear all the settings on this page. Or click Upload to start the upgrade.