AirLive WL-5460AP v2 - Manual (Page 45)

AirLive WL-5460AP v2 User Manual
46
Ø DMZ: You can use DMZ Settings to provide connection on internet. For example, you
can have your own web server at home and provide access on internet. This will need
port 80 by default for Virtual Server Settings.
Ø Remote Management: This is to configure WL-5460AP be managed from internet.
Note that port 80 is always used by web service. You can change the port to prevent
conflict.
Ø Dynamic DNS: Dynamic DNS (DDNS) allows you to create a hostname that points to
your dynamic IP or static IP address or URL. WL-5460AP provide Dynamic DNS client
using DynDNS, please visit http://www.dyndns.org for detail.
Ø Ping: You can enable to the “Response to WAN Ping” to allow remotely ping your
WL-5460AP.
Ø DoS Setting: In WL5460AP, a denial-of-service attack (DoS attack) can block or limit
the system sending network flood to your local computer.
Ø Diagnostics: The nslookup command can be used in diagnostics to find the IP
addresses of a particular computer, using DNS lookup. The name means "name server
lookup". The most common version of the program is included as part of the BIND
package.
Ø URL Filtering: The URL filter database is used for internet filtering that blocks access
to unwanted web content by URLs.
Ø MAC Filtering: Enables you to allow or deny Internet access to users within the LAN
based upon the MAC address of their network interface.
Ø IP Filtering: The IP filter function enables you to define a minimum and maximum IP
address range filter; all IP addresses falling within the range are not allowed Internet
access
To configure the security connection, please refer to Section 3.9 Wireless Security
Settings ……
To configure the Advanced Settings, please refer to Section 3.10 Advanced Wireless
Settings ……
To configure the access control, please refer to Section 3.11 Access Control
Settings ……
To configure the Traffic Control, please refer to Section 3.12 Access Control
Settings ……