Atop Technology SE5416A User manual - Manual (Page 15)

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
15
3.4 First Time Installation
Before installing the device, please adhere to all safety procedures described below, Atop will
not be held liable for any damages to property or personal injuries resulting from the
installation or overall use of the device. Do not attempt to manipulate the product in any
way if unsure of the steps described here, in such cases please contact your dealer
immediately.
1. Prepare the necessary cables, power cord, LAN cable, serial cable, etc.; do not connect
the unit yet.
2. Proceed then to plug the power source to the unit.
3. Place the device in the desired location and connect it to the LAN via an Ethernet cable
with an RJ45 connector.
4. Connect your computer to the LAN network.
Note: Remember to please consult your Hardware Installation Guide when attempting an
installation. Also, please follow all safe procedures when doing so.