6 com port configuration, 1 tcp server for link mode, 2 tcp client for link mode – Atop Technology SE5416A User manual User Manual
Page 64: Com port configuration, Tcp server for link mode, Tcp client for link mode
Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
64
6.6 COM Port Configuration
SE5416A Series allows you to configure the parameters of the COM port including COM Link
mode and COM port parameters. First enter the number of the COM port that you want to
configure.
Figure 6.11
6.6.1 TCP Server for Link Mode
TCP Server mode is the default Link Mode for SE5416A Series. A TCP Client is required to
connect to this TCP Server. You will need to configure Virtual COM, Max Connections, IP
Filter, and Local Port settings.
Operation: Main [6]COM Port Setting[1-4]Select Port[1]Link Mode[1]TCP Server
Figure 6.12
6.6.2 TCP Client for Link Mode
SE5416A
Series’ Link Mode can be configured as a TCP Client. In this case, SE5416A Series
will connect to a TCP Server. You will need to configure the settings for Destination IP 1 and 2