3 welcome screen, 4 main menu structure – Atop Technology SE5416A User manual User Manual
Page 52
Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
52
2. Press the “ESC” key to return to the previous menu.
3. Some changes to the device would take effect only after the device is restarted.
4. Detailed explanations are embedded in the
There is an LCM (Liquid Crustal Monitor) installed on the front panel of the device that can be
used to display device information and perform basic configurations. The table below
illustrates its buttons and corresponding functions.
Open Main Menu or go back one level
Confirm the selection. When working
with IP addresses, pressing <SEL>
means moving to the next digit
When the device boots up, the LCM will display LAN1. If you scroll down, it will display LAN2
Press the <Menu> Key to enter the main menu. Press <Scroll Down> to go to the next layer or
option. Press <Scroll Up> to go to the back one layer or option.