Atop Technology SE5416A User manual - Manual (Page 46)

Atop Industrial Serial Device Server
SE5408A/SE5416A Series
User Manual V 1.0
46
5.6.5 Time Settings
Date and time can be set manually, or using Network Time Protocol (NTP) to automatically
synchronizes with a Time Server. For auto-synching select NTP in the Time Setting field,
proceeding then to fill the IP address or host name for it. If a hostname is entered, the DNS
server must be configured properly; a Time Zone can be selected as well.
Attention
It is also important to setup Default Gateway and DNS Servers in the Network
Settings properly, so your SE5416A Series can lookup DNS names and find
the external NTP Server.
In case that you are located in a region where Daylight Saving Time (DST) is being used,
enable this option and setup the start and end date when DST will become effective. Also enter
the time that DST offsets (usually one hour).