Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 17

Advertising

Waste Gate Type.

1. Make sure the valve type is set as waste gate type (WG) at the controller’s

function menu.

2. Take the boost pressure between the turbocharger’s compressor cover and the

throttle valve and connect it to the IN of the solenoid valve unit. Make sure to
use the clamps supplied with the kit.

3. Moreover, the same boost pressure (compressor cover and the throttle valve)

must be connected to the B chamber (Lower chamber) of the Waste Gate. Make
sure to use the clamps supplied with the kit.

4. Connect the OUT of the solenoid valve unit to the A chamber (Upper chamber)

of the Waste Gate. Make sure to use the clamps supplied with the kit.

Note: If you have a TIAL, Turbonetics or other domestic manufacturer external
waste gate using the A/C setting may provide more accurate control.

Connect to the
IN of the Valve

Connect to the
OUT of the Valve
U it

Waste

Throttle

Turbo Charger

Surge Tank

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals