Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 22

Advertising

4) Boost Set Up

Select “Boost Setup” at the “CALIBRATION” screen and then press the encoder.

AUTO (Automatic boost set up)

4 different settings can be chosen from 4 different channels (CH). First choose a
CH that would be set as the base CH.

Operation method:
Turn the encoder to select “Channel” and then press the encoder. Turn the encoder
to select the CH (CH1～CH4) and then press the encoder on the desired CH to
confirm.

Select “AUTO” for automatic boost control.
Note: Automatic mode is not as accurate as the manual mode.
Operation method:
Same as “Channel” (shown above)

Input the desired boost value.
Units in hkpa from 0～2.45.

hkpa kg/cm2 bar

tm mmHg psi

1 1.02 1 0.987

750

14.5

Input the desired GAIN value.
GAIN is the adjustment of boost response.
The larger the number, the faster the response of the boost and vice versa.
From 0 ～ 100.

We recommend setting the GAIN on:
Stock turbo: 15～25.
Sequential, ball bearing turbo: 5～15.

The limiter and scramble function will be explained later.
The initial setting will be OFF at this time.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals