Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 26

Advertising

Press the RIGHT switch to go back to the ICON MENU.

Turn the ENCODER to change the design of the back ground from white → Black →
Carbon → Blue.

Pressing the encoder button for over 2 seconds will shift to the boost control CH change
mode.
Press the encoder again to confirm the change or press the RIGHT switch to cancel the
operation.

The UP Switch is also a short cut key to return from the CH change mode and controlled
value change mode and the changes will take effect.

By pressing the encoder once again, it will shift to the change mode of the boost set
value.
The changes will take effect instantly in a case of MANU mode.

See the AUTO and MANU boost set up for detailed explanation.

The changes will only take effect after the encoder is pressed while at ATUO mode.
Press the RIGHT switch to go back to the previous screen or press the UP switch to
confirm the changes and go back to the previous screen.

Will shift to the display items (second ～ fourth) change mode by pressing the encoder
for a short while at the first screen. It will return to the previous screen if any operation
is not performed for 10 seconds. The second item is the selection of the “METER PK”
displayed value of the needle. Cannot be left blank in this case.

The needle will turn red and blink when the first item displayed at the needle meter
becomes warning. The set warning will be displayed when the digital values of the
second ～ fourth items becomes warning.
The source of the warning will pop out when a warning is set.
The controlled CH will be displayed in red when the boost pressure of the controlled CH
is still in learning.

There is a slight difference in the location for the Peak Mark and the actual digital value
of the Peak value. For example, the digital peak value is set at 0.80 hkPa but the Peak
Mark would be located at 0.804 hkPa.

There is also a slight difference in the location of the Warning Mark and the set warning
digital value because of the digitally processed dots.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals