Monitoring functions, Regarding the boost controller, Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 3

Advertising

Monitoring functions

Digital display:
A total of 12 data (Boost, Tacho, Speed, Power, Temp (Oil/Water), Fuel Press, Oil Press,
Data 1 ～ 3 (A separate harness is necessary) can be monitored and it can display
simultaneously on screen a maximum of six data.

※

A/F can be displayed at the AUX port or at the external voltage port Data 1～3.

※

The sensors are necessary to purchase separately.

Analog display:
The Boost, Tacho, Speed, Power, Temp (Oil/Water), A/F, Fuel Press and Oil Press are
reproduced as an analog meter image at the LCD. It can monitor a maximum of 4 data,
including the digital displays at the screen, and the boost set up is at will. Moreover, the
background can also be chosen from a white, black, carbon, and blue.

Multi-angle display function
The display of the LCD can be set as left, right and perpendicular (the LCD at the top)
operation angles. By selecting any one of these three angles, the switches also change
automatically to the related angle.

Convenient functions
It has a full load of convenient functions, such as a peak display, independent warning
setup by source, maximum of 10 minutes of record/replay function (replay function can
convert the unit displayed), back light adjustment, dimmer function, contrast adjustment
and language selection.
Optional A/F display function
If the optional A/F amplifier unit is connected, the A/F ratio can be measured and
monitored, which can compare with boost or other sources. Thus, the boost setting can be
broadened.

Regarding the boost controller

Sequential valve control:
Two-solenoid valves operate sequentially depending on the valve-open ratio. Mainly, the
first valve will do most of the work at low valve-open ratio and at high valve-open ratio; the
second valve will come to play.

Automatic correction of boost pressure (Initial learning):
It will automatically correct to the desired boost pressure that has been configured. A C
mark will change color from RED to WHITE when the correction cycle (DUTY value) reaches
the desired value. While the C mark is lighted, the SCRAMBLE MODE or the SPEED MAP
MODE will not take effect on the used channel. However, the boost control will take effect
even if the C mark does not change to WHITE color. This time, to perform the initial learning
smoother, the normal, mild and slow function has been added. The Automatic correction of
boost pressure is not applicable on manual mode.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals