Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 36

Advertising

Press the LEFT switch for over 3 seconds and it will clear the boost peak
value. The digital display specs are the same as the dual and six fold
digital display.
Press the encoder and the blue frame will change to orange to select the
location and turn the encoder to select the RPM range where changes
would take place. Press the encoder to confirm the changes and it will shift
to the change screen. Select the CH1～OFF by turning the encoder. Press
the encoder to confirm the changes and it will shift to the MAP display.
(Press RIGHT to cancel the changes and to return to the previous screen)

⑪

Speed MAP
Controls the boost based on Speed.
The operating methods are the same as the RPM MAP.

The boost and the peak value is displayed at the left bottom of the screen.

When the controlled CH is not the MAP, the “＊” mark will trace the
controlled CH. The trace mark will is not displayed at the EXT control.

A yellow cursor represents the present tracing.

The maximum RPM is 9000.

Configuration Method:
16 blue frames represent the MAP.

⑩

RPM MAP
Controls the boost based on RPM.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals