Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 23

Advertising

MANU (Manual boost set up)

4 different settings can be chosen from 4 different channels (CH). First chose a
CH that would be set as the base CH.

Operation method:
Turn the encoder to select “Channel” and then press the encoder. Turn the
encoder to select the CH (CH1～CH4) and then press the encoder on the desired
CH to confirm.

Select “MANU” for manual boost control.

Operation method:
Same as “Channel” (shown above)

Input the desired “Point” value.
0 ～ 100 units.

Advice:

Point method represents the ratio between the normal boost pressures. It is not
the direct value of the boost pressure. The point 0 represents the Max normal
boost (boost pressure set by the manufacturer) and the point will go up to 100,
which the boost pressure will keep rising up to the limit of the vehicle (the turbo)
can handle.

ATTENTION:

Ignoring these indications may cause injuries or minor injuries to

the individual and (or) to a third party. It may also cause
malfunctions and breakages to the product and (or) to the vehicle.

put the desired GAIN value.

t response.

se of the boost and vise versa.

e recommend setting the GAIN on:

g turbo: 5～15.

an be set at 25～+ if a faster response and overshooting is desired

he limiter and scramble function will be explained later.

In
GAIN is the adjustment of boos
The larger the number, the faster the respon
From 0～100.

W
Stock turbo: 15～25.
Sequential, ball bearin

C

T
The initial setting will be OFF at this time.

With above steps finished the boost controller can be used

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals