Online manual not for resale purposes – BLITZ SBC i-Color User Manual

Page 20

Advertising

Initial Setting

Basic function. (First of all, carry out the initial setting at the function and calibration mode).

1) Setting of language and type of exhaust gas

bypass.

Select “Funct” at the “ICON MENU” screen and
then press the encoder.

Turn the encoder to select the language.
Press the encoder again to confirm.

Follow the same steps to change the selection

from AC (Actuator) or WG (Waste gate).

※

Be careful not to make mistakes in
selecting the type of exhaust gas bypass
since it might damage or break the engine.

2) Setting of vehicle speed and RPM.

Select “Calib” at the “ICON MENU” screen and
then press the encoder.

To calibrate vehicle speed, select “SPEED
CALIBRATION” and choose from the types of

pulses (2, 4, 8 or 16), or select “Keep 40 km/h
& Enter” to calibrate the speed pulse.
(40 km/h is approximately 24.8 mph)

Follow the same steps to calibrate RPM, select
“TACHO CALIBRATION” and choose from the
numbers of cylinders (3, 4 or 6), or select “Keep
3000 RPM & Enter” to calibrate the RPM pulse.

WARNING; All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this maybe reproduced,
stored in retrieval systems, or transmitted in any form or means without prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals