CounterPath Bria 3.1 for Windows User Guide - Retail Deployments - Manual (Page 85)

Bria 3 for Windows User Guide – Retail Deployments
81
XCAP Settings
Username and password The user name and password to log into the storage server.
Root URL URL of an appropriate root folder on the remote server. The factory setting is https://
xcap.$domain$/xcap/$username$/
Outlook Settings
Outlook profile The profile to use
Profile password The password for the selected profile
Field to use The field where softphone addresses are stored in Outlook contacts. This mapping is used as
follows:
• If you use a SIP account for IM and presence, then when a Bria contact is created from the
Outlook contact, the Bria Softphone fields and IM fields (viewable on the contact flyout) will
be populated with the data from the mapped Outlook field.
Bria will assume that this data is a SIP address and can be used to place phone calls and send
IMs and that it could be subscribed to for online status information.
• If you use an XMPP account for IM and presence, then when a Bria contact is created from
the Outlook contact, the Bria Softphone field (viewable on the contact flyout) will be
populated with the data from the mapped Outlook field.
Bria will assume that this data is a SIP address and can be used to place phone calls.
Table 12: SIP Account Properties – Storage
Field Description