Det-Tronics ATX10 Transmitter - Manual (Page 35)

2.5 95-8657 33
appenDix e
MARITIME APPROvAL
DNv
Type Approval Certificate No. A-11023.
Subject Matter of the Approval
Model AC100 Acoustic Sensor, ATX10 Transmitter, and STB Termination Box are found to comply with Det Norske
Veritas’ Rules for Classification of Ships and Det Norske Veritas’ Offshore Standards.
Application/Limitation
Location Classes
MODEL TEMPERATURE HUMIDITY vIBRATION EMC ENCLOSURE
AC100/ATX10 D b b b C
Relevant tests according to “Standard for Certification No. 2.4”.
Line Filter
A line filter is required for all maritime installations. Phoenix Contact model ME-MAX-NEF/QUINT20A is approved
for use with the AC100/ATX10 Acoustic Detector and must be installed within 12 inches (30 centimeters) of the
detector.
ATX10
TRANSMITTER
BOARD
24 VDC
INPUT
4-20 mA
PLC 4-20 mA INPUT CARD
–
+
250
OHMS
MINIMUM
J3-1
J3-2
J3-3
J3-4
J3-5
A
B
24
VDC +
24
VDC –
SHIELD P1
-4
P1
-3
P1
-2
P1
-1
24
VDC +
4-20 mA
24
VDC –
SHIELD
P3-4
P3-3
P3-2
P3-1
JUMPER
TO GND
GND
B
A
POWER
AND OUTPUT
SENSOR
INTERFACE
TO SOFTWARE
CONFIGURATOR
L
N
PE
L
N
PE
LINE FILTER*
* LINE FILTER MUST BE LOCATED LESS THAN
12 INCHES (30 CM) FROM ACOUSTIC DETECTOR.