Det-Tronics X9800 IR Flame Detector - Manual (Page 29)

27 95-8554 11.1
appenDiX e
EN54 AppROVALs
INsTRuCTIONs FOR THE AppLICATION OF THE AppROVAL COMpONENT/sysTEM
The installation shall take into account, that the orientation arrow on the flame detector is directed upwards, as the view
angle in this direction is <90°.
The IR-flame detector corresponds to class 1.
AgENCy
Conventional Output LON Output
certificate/approval
number
basis of approval
certificate/approval
number
basis of approval
VdS –
Construction Product Directive
0786 – CPD – 20779 EN 54-10 + A1 — —
VdS
G 203084
VdS 2344
VdS 2504
EN 54-10 + A1
— —
S 212002*
VdS 2344
EN 54-13
S 212002*
VdS 2344
EN 54-13
BRE –
EC – Certificate of Conformity
— — 0832 – CPD – 1377
EN 54-10 + A1
EN 54-17
LPCB 973e/01 EN 54-10 + A1 973a/01
EN 54-10 + A1
EN 54-17
* approved for use in conjunction with the en54-13 compliant eQp system .
The following accessories are EN54-10 and EN54-17 approved for use with the X9800 Flame Detector:
part Number Description
102740-002 Magnet
007739-001 Magnet and Extension Pole
007290-001 Q9033B Stainless Steel Mounting Arm Assembly is for aluminum and stainless steel detectors
007290-002 Q9033A Aluminum Mounting Arm Assembly is for aluminum detectors only
011385-001 Q9033 Collar Attachment