INFICON SKY CDGxxxD (Profibus) - Manual (Page 36)

36
tira54e1-a (2009-01) CDGxxxD.cp
9 OneOfN Analog Input Function Block
The figure below shows the basic design of the analog input function block.
Instance 2 of the Analog Sensor Input Function Blocks describes the functionality
of the Atmosphere Pressure Sensor (ATM) measuring part of the gauge.
The following attributes are supported:
ID Name Structure Data type Bytes Access Store See section
17…45 - - - - - - 9.1.1
46 Channel Instance
Selector
Simple UINT8 1 1_R/W
2_R/W
N 9.1.2
The parameters 17…45 of the One of N Channel Sensor Analog Input Function
Block are identical with the parameters 17…45 of the Sensor Analog Input Function
Block. See section 8.1.
Provides access to the selected parameter instances via the function block
parameter interface. The channel instance number starts with 1. The selector
determines which function/transducer block parameter set is mapped into the
"OneOfN Analog Input Function Block" or "OneOfN Vacuum Gauge Transducer
Block" address space.
9.1 Information on the
Individual Indices
9.1.1 Parameters 17…45
9.1.2 Channel Instance
Selector (ID 46)