JUMO 902910 CANtrans T RTD Temperature Probe with CANopen Output Operating Instructions - Manual (Page 23)

23
6 Device function
6.1 Device profile
CANtrans transmitters operate according to the CANopen device profile
DS-404 “Measuring Devices and Closed-Loop Controllers”. The graphics
below show the signal flow of the measurement through the transmitter
functions. Some functions can be set by the customer.
The setting options are described in
➩ Chapter 7 “Object dictionary”, page 25.
6.2 Data flow: pressure channel
The calculation for the pressure channel is processed every 1.0 msec.
A/D conversion
with calibration
Emergency
output
Filter
Status
0x6150,Bit0
Pressure
sensor
Scaling Fine calibration
Process value
0x6130
in customer unit
Range
monitoring
Factor
0x6126
Offset
0x6127
Offset
0x6124
Autozero
0x6125
Range end
0x6149
Measurement
0x9130
INT32
PDO
output
Decimal point
Decimal places
0x6132
Drag pointer
function
Reset
0x3102
Range start
0x6148
Status
0x6150, Bit1 = OR
0x6150, Bit2 = UR
0x3100 min.
0x3101 max.
Filter constant
0x61A1
Field value
0x6100
pressure 0 - 100%
Sensor monitoring:
sensor fault
Pressure
in 100%