JUMO 902910 CANtrans T RTD Temperature Probe with CANopen Output Operating Instructions - Manual (Page 7)

7
2 Transmitter JUMO CANtrans
2.1 Application
Transmitters in the JUMO CANtrans series are used for acquiring pressures or
temperatures in liquid or gaseous media.
The measurements from the pressure or temperature sensors are digitized and
made available for further processing via the CANopen serial bus protocol.
Several useful extra functions are implemented through the DS 404 device
profile. All settings can be made using standard CANopen software tools.
2.2 Block diagram
Overview of the CANtrans series
CANtrans p Ceramic Type 40.2055 Pressure transmitter
(ceramic sensor)
CANtrans p Type 40.2056 Pressure transmitter
(stainless steel sensors)
CANtrans pT Type 40.2057 Pressure and
temperature transmitter
CANtrans T Type 90.2910 Temperature or twin
temperature transmitter
Pressure P or
A/D
Date / Name (11)
Drag pointer
(Min / Max)
(10)
Range
monitoring
(9)
Decimal point (8)
Linearization (3)
Fine calibration (7)
Scaling (6)
Sensor
monitoring
(5)
Calibration (2)
PDO
Measurement, 32 bit
Status, 8 bit
(13)
EMERGENCY
Probe break /
short-circuit
(12)
(1)
Device functions
(DS 404 profile)
Heartbeat
(15)
SYNC
(16)
NMT
(17)
LSS
(18)
Filter (4)
Temperature T
Node Guarding
(15)
SDO
Parameters
Measurements
Status
(14)