KD Scientific Legato 200 Series - Manual (Page 24)

24
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Configuring the KDS Legato 200 Series
Password Protection
A password can be enabled to prevent accidental
changes to program settings. Unlocking the
touchscreen requires a password, defined by
the user.
Setting the Password
To set the Password go to the Settings screen.
Press the Set Password button.
Enter your desired password, up to 8 digits, and
press the “ACCEPT” button.
Turning the Touchscreen Lock on
Press the Lock button twice to lock the
touchscreen.
Turning the Touchscreen Lock off
Press the “LOCK” button to bring up the Set the
Pump Password screen.
Enter your password and press the “ACCEPT”
button.
✐
NOTE: If you forget your password
contact KD Scientific Technical Support
at 508-429-6809.
Password
Lock Button
Set password
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l