KD Scientific Legato 200 Series - Manual (Page 27)

27
Configuring the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Setting the Pump Address
Up to 100 pumps can be linked together. Each pump
can be given a unique address.
In the Set-up Screen press Pump Address .
Valid entries are 00 to 99.
Enter the pump address.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
Press Here
Press Here
Press here to
select Baud Rate
Setting the RS 232 Baud Rate
The Legato 200 Series has an RS 232 port for serial
communications.
To adjust the baud rate from
9600 to115,200: in the Set-up screen
press Baud Rate
Select the Baud Rate.
Accept the changes made by pressing
and go back to the Set-up screen.
Cancel the changes made by pressing
and go back to the Set-up screen.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com