KD Scientific Legato 200 Series - Manual (Page 67)

67
Operating the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Confirm
CONFIRM- Press the lock button again, to lock the
screen.
CONFIRM- Press button again to delete this program.
CONFIRM- Press button again to reset
calibration date.
CONFIRM- Press button again to reset maintenance
interval.
CONFIRM- Press button again to delete step.
Verified
VERIFIED- Program was copied.
VERIFIED- Program was exported successfully.
VERIFIED- Added step #%d...
VERIFIED- Program was successfully imported.
Alarm
ALARM- Pump is due for calibration.
ALARM- Pump is due for lubrication.
ALARM- Pump is due for calibration and lubrication.
Critcal Errors
ERROR 401- Infuse rate could not be saved to disk.
Contact factory.
ERROR 402- Withdraw rate could not be saved to disk.
Contact factory.
ERROR 403- Program step could not be saved to disk.
Contact factory.
ERROR 404- Program could not be read from disk.
Contact factory.
ERROR 405- Program step could not be read from disk.
Contact factory.
Notice
NOTICE- Screen locked. Press the lock
button to unlock.
NOTICE- Deleting program.
NOTICE- Importing new program: %s...
NOTICE- Exporting step #%d...
NOTICE- Checking program.
NOTICE- Press run to start the pump at [date] [time].
NOTICE- Program is on a time delay. Press here to
cancel.
NOTICE- Waiting for screen press.
NOTICE- Waiting for an event.
NOTICE- Copying a program.
NOTICE- Verify rates and target.
NOTICE- Withdrawal complete, press to
clear alarm.
NOTICE- Infusion complete, press to clear alarm.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com