KD Scientific Legato 200 Series - Manual (Page 70)

KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
70
Appendices
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
Pusher Block Assembly
1. Remove Dual Syringe Anti-Syphon Bracket by
unscrewing and removing the two T Knobs and
two Spring Washers.
2. Attach the Pusher Bar to the Pusher Block using two
flat head screws.
3. Attach the Anti-Syphon bar to the Pusher Bar with
three Thumbscrews and three Springs. Slide
Thumbscrews thru the Pusher Bar’s holes, slide the
Springs over the Thumbscrews and tighten
Thumbscrews to the Pusher Bar.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
APPENDIX C: RACK ACCESSORIES/OPTIONS
Mounting a 4 X 140 Multi-Rack (Continued on page 69)