KD Scientific Legato 200 Series - Manual (Page 46)

46
Operating the KDS Legato 200 Series
K
D
S
L
e
g
a
to
2
0
0
S
e
ri
e
s
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 200 Series Syringe Pump User’s Manual
Publication 5617-002-Rev F
Incorporating Advanced Options
(Commands and I/O) Into A Program
KDS Legato 200 Series Programs can incorporate a variety
of commands that expand the versatility of the system by
permitting convenient looping, chaining of events, sending
signals to external devices, or accepting inbound signals
from external devices. These Advanced Options controls
are described in this section of the Guide.
To access the Advanced Options, choose Advanced
Options from the Select Profile screen.
Go To Step
The Go To Command is used to instruct the KDS Legato
200 Series to jump to a particular Step in a Program.
This can be used to help you loop back or jump forward
in a Program protocol and can be used in conjunction
with I/O Events to make the pump respond to a trigger
from an external device.
When defining a Go To jump in a Program, the
Command targets the Step sequence position and not the
function that currently occupies that position. For
example, if you create a Go To jump to Step 4 in a
Program (currently a Ramp Pump Operation Profile) and
subsequently move a Constant Rate profile into the Step
4 position, the Go To jump will then connect to the
Constant Rate operation and not to the Ramp operation.
TO INSERT A GO TO JUMP:
1. From the Program Main screen, choose Step
Definition to enter the Step Definition screen.
2. Highlight (select once) the Program Step that you
want the Go To jump to follow.
3. Choose the Insert Step button to access the
Program Steps Menu screen.
4. Choose Advanced Options to enter the Set
Advanced Options screen.
5. Choose Go To to insert the Go To Step and view
an updated list of all current Steps in the Program.
6. Double tap the Step that you want to jump to with
the Go To Command. The system automatically
returns to the Step Definition screen which now
shows the Go To Step inserted in the Program.
Program Step Profile Selection Advanced Options
screen showing available command options
Advanced Options Go To Step screen. Choosing the
Go To Command brings you to a listing of the
available steps in the Program
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com