Kinze 3700 Front Folding Planter Rev. 7/14 - Manual (Page 101)

TM
Model 3700 M0233-01
Rev. 10/11 5-5
Lubrication and Maintenance
Clean and grease PTO shaft coupling each time pump
is installed.
Apply coating of high-speed industrial coupling grease,
such as Chevron
® Coupling Grease meeting AGMA
CG-1 and CG-2 Standards to extend shaft spline life.
LiqUid ferTiLiZer piSTOn pUMp CranKCaSe OiL LeveL
Check crankcase oil daily and maintain at oil level
check plug. Fill as needed with EP 90 weight gear oil.
Total oil capacity is approximately ¾ pint.
Refer to operator and instruction manual supplied with
pump and flow divider for more information.
piston pump oil fill and check plug locations
Fill plug Check plug
pTO ShafT COUpLing
pTO pump installed
wrap Spring wrenCh aSSeMbLy
Wrap spring wrench components may require
occasional lubrication to operate correctly using a high
quality spray lubricant.
Operate wrap spring wrench when lubricating so
lubricant can be absorbed into wrap spring area.
wrap spring wrench lubrication