Kinze 3700 Front Folding Planter Rev. 7/14 - Manual (Page 20)

M0233-01 Model 3700
2-10 Rev. 10/11
TM
Machine Operation
wrap Spring wrenCh OperaTiOn
Chain idlers are equipped with wrap spring wrenches. L.H. rotation wrap spring wrenches have a blue release collar and
R.H. rotation wrap spring wrenches have a grey or black release collar.
Rotate collar on wrap spring wrench and pull handle to release chain tension.
Rotate chain idler into chain and pull handle to tension idler spring.
Collar
wrap spring wrench (L.h. rotation shown) Chain idler tensioning
Shear prOTeCTiOn
Determine where binding has occurred if excessive load causes a pin to shear before replacing pin. Replace shear
pins with same size and type.
Additional shear pins are in the storage area located at end of each planter wing on inboard side of transport hook.
Transmission shaft shear pin Spare shear pin storage
NOTICE
Misalignment of drill shaft/transmission coupler alignment will
cause equipment damage.
Planter driveline and seed and granular chemical drivelines are protected from damage by shear pins.