Kinze 3700 Front Folding Planter Rev. 7/14 - Manual (Page 136)

M0233-01 Model 3700
5-40 Rev. 10/11
TM
Lubrication and Maintenance
eLeCTriCaL COnTrOL COnSOLe SCheMaTiC
nOTe:
1. Operating row marker or point row switch in either direction lights panel light.
2. point row clutch switch operates independently from rest of control box.
3. power to row marker switch is fed through auxiliary switch and two transport function switches.
Operating any switch in lower row disables row marker function and turns off panel light. (if point row
clutch switch is “Off”.)
4. See page 6-41 for two-speed point row clutch electrical control console and wiring harness schematics.
MAIN
FUSE
15A
USE 10 AMP
DELAY
ACTION
ONLY
POINT ROW
OFF
LEFT
ON
OFF
AUXILIARY
ROTATE
TONGUE
OFF
RIGHT LEFT
MARKER
OFF
WING LOCK
RAISE
MARKERS WILL NOT FUNCTION WITH AUXILIARY SWITCH ON
RIGHT
fi
Pin “C” Black/Red (Ground) Pin “T” Black (Ground)
Black (-12 VDC) Red (+ 12 VDC)
Pin “B” Blue/Red (Rotate)
Pin “W” Orange/Black (Auxiliary)
Pin “R” Brown (Left point row clutch)
Pin “G” Orange (Right point row clutch)
Pin “H” Blue (Left marker)
Pin “O” Red (Right marker)
Main fuse (15A)
Delay Action Fuse (10A Slow-Blow)
Point row clutch switch
Auxiliary switch
Rotate/Tongue switch
Indicator light
Marker switch
Raise/Wing Lock switch
Pin “F” Yellow/Red (Not used)
Pin “V” Blue/Black (Raise)
Pin “A” Orange/Red (Tongue)
NOTICE
disconnect control console from tractor battery
before doing any electrical work or shorting will
damage equipment. Keep wiring harnesses away
from high temperature areas or sharp edges. dO nOT
route wiring harnesses along battery cables. Use
cable ties to keep wire harness away from moving
parts on tractor and planter. ground connections to
tractor frame must be clean to provide good electrical
contact.